It’s unavoidable that your garage door springs will wear out over time, and they’re a potential hazard when they do. Because of the risk of flying metal or a falling door, we highly recommend having your springs inspected and tested by professional technicians. Even if you have just one broken spring, your home and family may still be at risk. You should replace your spring in this event. Regularly maintaining your door will not only keep you safe, but it’ll also keep your garage door working longer.
Garage doors are the largest, heaviest moving part of your home
Understanding its safety features is critical to keeping you and your family safe, as well as preventing damage.
If you’re ever concerned about the safety of your garage door, please don’t hesitate to call Overhead Door Company of Southeast Wisconsin™️.
Garage Door Safety Tips
If you have frayed or worn-out cables, it may mean you’re at risk of a break. That’s why you should check them frequently and contact a trained technician in the event you need a replacement.
Everyday wear and tear can leave your springs noisy. This can be solved with the proper spray-on lubricant, which will reduce noise and squeaking with your springs. IF that doesn’t solve the problem, call us to resolve the problem.
Unless you have professional experience and training, it’s imperative that you DO NOT install or service your own garage door. Installation carries serious risk.
The Door & Access Systems Manufacturers Association (DASMA) suggests that you only use professional technicians. Attempting your own repairs can cause injury and/or damage to your door, home, or car.
If you don’t have extension springs on your door, it’s crucial to install a safety cable and secure it to the wall and/or ceiling at each end. Because most families open and close their doors often, the tension to your garage door springs increases. If these springs break, they can cause serious damage or injury. Call your Southeast Wisconsin garage door installers if you need more information.
You might have several problems occur with a “struggling” door. Most of the time, you’ll need help from a professional technician, as spring systems can be potentially dangerous.
Specifically, please don’t put your fingers in between door panels. This mistake can cause significant injury. If you don’t have an electric garage door opener, utilize your garage door handles or other safe gripping points.
Your garage door springs are under a large amount of tension when closed, and it can put people around you at serious risk if the springs become broken. Only trained technicians should perform this repair.
It may save you money, but installing old tracks may also put you at significant risk. Old tracks make it likely that your door won’t fit onto the track, which can cause serious damage in the form of collapse or derailment. Repairs like these may cost you more money in the long run as well.
We highly encourage regular check ups and routine maintenance to ensure that your door is running safely and efficiently for the long-term.
Safety Tips for Garage Door Openers
To avoid injuries, especially to children and pets, wait until your door is completely shut before leaving the garage or driveway.
If you aren’t attentive, reinforcement brackets can cause damage to your garage door. It’s recommended that you check your installation manual for further instructions.
If your door is operating slower than normal, it doesn’t necessarily mean that your garage door opener is weak. Before wanting something more “powerful”, call a properly trained technician to assess the issue and provide the correct solution.
Photo-eyes should be installed more than six inches above the garage floor. If there is a person or object in the line of the photo eyes, the door will not lower. If your photo-eyes aren’t properly installed, you risk damage or injury from a person or pet not being detected.
Make sure that your garage door opener switch is placed at least five feet from the floor or higher. This helps prevent accidental button pushes from younger children in the house.
It’s imperative that your children don’t play with remote controls. It’s recommended that, after installation, you warn your kids about the possible risks of remote misuse. We’ve often found that the best way to communicate this is to say that the remote is “off-limits”.
We typically recommend routine maintenance at least once per month for your garage door opener. This helps assure its safety and functionality.
Additional Tests & Safety Measures
You can perform a routine visual inspection on your door. While we recommend leaving any repairs to qualified technicians, monitoring your door on your own time will help you spot any issues with springs, rollers, cables, pulleys, and other hardware.
There is a test that can be performed to check a door’s balance. When your door is closed, try lifting the door (if you have a remote opener, use the release mechanism to allow you to operate the door by hand). You should be able to lift the door easily, with little resistance. Additionally, your door should be able to stay open about 3 to 4 feet above the floor without being held. If your door doesn’t pass these assessments, it could mean that your door needs adjustment.
According to federal law, every garage door opener needs to include compliant safety features that match the latest standards in UL 325 (Underwriters Laboratories). If you want to test your reversing feature, you can perform an at-home test. First, test the balance (detailed above). If your door passes these tests, you can proceed to the reversal test.
Completely open the door and place a 1-1/2″ thick piece of wood (a 2×4 laid flat) near the center of the door on the floor. Once you’ve done this, press the wall button (or remote) to close the door. The door needs to hit the wood in order to reverse. If the door doesn’t reverse, it must be evaluated, and soon. (Note that the bottom of the “one-piece doors” must be rigid enough to reverse when it comes into contact rather than close completely).
If you want to test the force setting of your door, you just need to hold the bottom of the door as it’s closing. If it doesn’t reverse immediately, your force setting is what we call “excessive” and needs to be adjusted.
Safety is our top priority, and that’s especially true for our customers with children and pets. Thankfully, most modern garage door openers come standard with additional safety features. As an example, many door openers include edge sensors (aka “photo eyes”) that are designed to protect against entrapment.
With that being said, adding more safety devices doesn’t necessarily make an old opener compliant with current UL Standards. Proper installation and adjustment is key to a safe and functional garage door. If you have questions, please don’t hesitate to contact Overhead Door Company of Southeast Wisconsin™️.
- Garage door springs, as well as the brackets, cables, and other hardware attached to the springs, are under an extreme amount of tension and should only be adjusted or repaired by trained professionals. Improper handling can lead to serious damage or injury.
- Adjustments to the springs above your door (also called “torsion springs”) should be handled by a professional garage door serviceman. To avoid injury, please don’t repair or adjust these springs yourself.
- A safety cable can, and should, be installed on your extension spring. This spring runs along the side of your door and acts as a safety backup in the event of a broken spring.
- Please do not adjust, remove, or loosen any screws on the bottom brackets of the door. These brackets are also under extreme tension as they are connected to the springs.